C&J Dobbin Certification


43 Kirk Road, Carluke, South Lanarkshire. ML8 5BN ( +44 (0)1555 771165 Ê +44 (0)1555 771165	Certification
	Our highly experienced site based staff are Graded S.J.I.B Approved, and C.S.C.S Assessed. Through our employee development program, all Senior Cable Jointers have been fully trained and assessed to carry out our works. In addition to this, all Senior status jointers are qualified and certified to install the following leading manufacturers/brands of equipment. Note. All H.V. cable jointing teams are headed by a Senior Cable Jointer.
		Scottish Power 11kV Cable Jointing Certification Covering Raychem, 3M, Pirelli, WT Henley, and Compound Filled Conventional type of Straight joints, Breech joints, Loop joints, Pot Ends, and all Cable End Terminations. Scottish Power Polymeric Cable Certification Covering 3M Cold Shrink Joints, End Terminations, Trifurcating Joints, Transition Joints, and Single core End Terminations.
		Approved Termination installer up to and including 52kV.
		Approved installers of Elastimold/Euromold Separable Connector Systems. Approved installers of 36CSSM-3 Coldshrink Cable Joints.
		Approved installers of 11kV Joints and Terminations. Approved installers of 33kV QS2000 Joint Kit 94-AP631-1.
		Approved installers of 11kV Joints and Terminations.
	HV Testing	Fully trained and experienced in the setting up and operation of H.V. DC test Equipment. Fully trained and experienced in principals of Sheath Fault Location using Pool of Potential method. Our engineers can accurately pin point underground cable sheath faults to within one metre, and often less. Non-intrusive oil testing of Transformers to determine the Transformer condition, and Oil PCB content.
	Authorised Person	As a market leader in H.V. electrical switchgear, we have staff who have been trained by Schneider, met the requirements, and are experienced in H.V. switching and Authorised Person duties. We can take ownership of a clients network and issue all statutory documentation to allow works to commence on a system.
		The company has met the requirements and is an Approved Sub-Contractor to Balfour Kilpatrick.
		The company has met the requirements and is an Approved Sub-Contractor to B.P.
		The company has met the requirements and is an Approved Sub-Contractor to Balfour Beatty.
		The company has met the requirements and is an Approved Vendor to CE Electrics H.V. Distribution Networks.
		The company has met the requirements and is an Approved Sub-Contractor to Alfred McAlpine.
		The company has met the requirements and is an Approved Sub-Contractor to Southern Electric Contracting.
		The company has met the requirements and is an Approved Sub-Contractor to Watson Norie Electrical and Instrumentation Engineers.
		Approved installers of 11kV M.I.R.P Cable joints.